Sony RDR-HX910 Operating Instructions Manual page 27

3
Select "Settings," and press ENTER
(enter).
4
Select "Set VCR Plus+ Channels," and
press ENTER (enter).
Settings - Set VCR Plus+ Channels
Guide CH
- - ----
Channel list
5
Select "Guide CH – TV CH," and press
ENTER (enter).
Settings - Set VCR Plus+ Channels
Guide CH
- - - - ----
6
Enter the guide channel number assigned
in the program guide using the number
buttons, and press SET (set).
Settings - Set VCR Plus+ Channels
Guide CH
33 - - ----
7
Enter the TV channel number using the
number buttons, and press SET (set).
Settings - Set VCR Plus+ Channels
Guide CH
33 - - ----
If you made Hookup A (page 15) or Hookup
C (page 17), enter the TV channel number on
your cable box.
If you made Hookup B (page 16), enter the
cable box output channel (Usually 2ch, 3ch, or
4ch). See the instructions supplied with your
cable box to confirm the cable box's output
channel.
8
Repeat steps 5 to 7 for each guide channel
number that does not match the TV channel
number.
9
Press SYSTEM MENU (system menu)
repeatedly to exit the menu.
TV CH
- -
TV CH
- -
- -
TV CH
- -
33
TV CH
- - 5
To return to the previous step
Press O RETURN (return).
To check the channel settings
When displaying the "Set VCR Plus+ Channels"
menu, select "Channel List," then press ENTER
(enter).
The display lists the channels for which the guide
channel number does not match the TV channel
number.
Settings - VCR Plus+ Channel List
Guide CH TV CH
2 - 21
4 - 32
6 - 9
10 - 121
11 - 13
25 - 36
28 - 2
To go to the next page, press m.
To return to the previous page, press M.
Page1
Guide CH TV CH
45 - 18
53 - 5
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
Close
27