Recording A Program - Sony RDR-HX910 Operating Instructions Manual

2. Recording a Program

* *
1 2
+
HDD RW - RW
*
6
-
R
This section introduces the basic operation to
record the current TV program to the hard disc
(HDD (hard disc drive)) or to a disc (DVD (digital
video disc)). For an explanation of how to make
timer recordings, see page 44.
HDD (hard
disc drive)
1 2
4 5
7 8
0
DISPLAY
(display)
z REC
(recording)
REC MODE
(recording
mode)
* 1 HDD (hard disc drive).
* 2 DVD+RW (digital video disc-rewritable, plus RW).
* 3 DVD-RW (VR mode) (digital video disc-rewritable,
minus RW (Video Recording mode)).
* 4 DVD-RW (Video mode) (digital video disc-
rewritable, minus RW (Video mode)).
* 5 DVD+R (digital video disc-recordable, plus R).
* 6 DVD-R (digital video disc-recordable, minus R).
1
Press HDD (hard disc drive) or DVD (digital
video disc).
When you record to a DVD (digital video
disc), insert a recordable DVD (digital video
disc) (see "Inserting a Disc" on page 31).
2
Press CH (channel) +/– to select the
channel or input source you want to record.
* * *
3 4
+
- RW R
VR
Video
DVD (digital
video disc)
3
CH (channel)
6
+/–
9
TV/VIDEO
(television/
video)
X REC PAUSE
(recording pause)
x REC STOP
(recording stop)
3
Press REC MODE (recording mode)
repeatedly to select the recording mode.
Each time you press the button, the display on
the TV screen changes as follows:
5
t
HQ (high quality)
HSP (high standard play)
SP (standard play)
LSP (long standard play)
LP (long play)
EP (extended play)
SLP (super long play)
SEP (super extended play)
For more details about the recording mode,
see page 44.
4
Press z REC (recording).
Recording starts.
Recording stops automatically after 8 hours of
continuous recording or when the disc is full.
To stop recording
Press x REC STOP (recording stop) located
beneath the remote control cover.
Note that it may take a few seconds for recorder to
stop recording.
To pause recording
Press X REC PAUSE (recording pause) located
beneath the remote control cover.
To restart recording, press the button again.
To watch another TV program while recording
Set your TV to the TV input using the TV/VIDEO
(television/video) button (page 22).
z Hint
If you do not want to watch TV while recording, you can
turn off the TV. When using a cable box, make sure to
leave it on.
33
,continued