Sony RDR-HX910 Operating Instructions Manual page 107

Recording does not stop after you press x
STOP (stop).
, Open the remote's cover and press x REC
STOP (recording stop).
Timer recording is not complete or did not start
from the beginning.
, There was a power failure during recording. If
the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more than
1 hour, reset the clock (page 93).
, The timer setting overlapped another setting that
was set later or has priority (page 47).
, Disc space was not enough.
Contents previously recorded were erased.
, Data that has been recorded on a DVD (digital
video disc) with a PC (personal computer) will
be erased from the disc when the disc is inserted.
, "Auto Title Erase" in the TOOLS (tools) menu
(appears when you press TOOLS (tools) while
the Timer List menu is turned on) is set to "On"
(page 54).
Recording from the equipment
with a timer
Nothing was recorded even though you set the
Synchro-Rec setting correctly.
, You forgot to turn off the connected equipment.
Turn off the connected equipment and set the
recorder to Synchro-Rec standby mode
(page 55).
, The recorder was not set to the Synchro-
Recording standby mode. Press SYNCHRO
REC (synchro recording) to have the recorder
stand by for recording. Make sure the
SYNCHRO REC (synchro recording) indicator
lights up on the front panel (page 55).
, The recorder is connected to the TV output jack
of the connected equipment.
Synchro-Recording does not complete.
, The timer setting for the connected equipment
overlapped the recorder's timer setting
(page 55).
, There was a power failure during the recording.
The recorder automatically starts recording
when the satellite receiver is turned on.
, The Synchro-Rec function was activated. Turn
off the satellite receiver and cancel the Synchro-
Rec function (page 55).
Display
The clock has stopped.
, Set the clock again (page 93).
, The clock stopped due to a power failure that
lasted for more than 1 hour. Reset the clock
(page 93).
The TIMER REC (timer recording) indicator is
flashing.
, The disc does not have enough space.
, Insert a recordable disc inside the recorder.
The recording mode indication is incorrect.
, When the recording or dubbing is less than three
minutes, the recording mode indication may be
displayed incorrectly. The actual recording itself
is correctly made in the selected recording mode.
, After playing titles recorded in SLP (super long
play) and SEP (super extended play) mode, the
recording mode indication may change
depending on the recorded program.
107
,continued