A: Cable Box Or Satellite Receiver With A Video/Audio Output - Sony RDR-GX310 Operating Instructions Manual

A: Cable box or satellite receiver with a video/audio output

With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that the
satellite receiver or cable box is turned on.
To watch cable or satellite programs, you need to match the channel on the recorder (L1 (line1) or L3
(line3)) to the input jack connected to the cable box or satellite receiver (LINE IN (line in) 1 or 3).
Audio/video cord
(not supplied)
to LINE IN (line in) 1 or 3
OUT
: Signal flow
z Hints
• If your cable box or satellite receiver has an S-video jack, you can use an S-video cord (not supplied) instead of the
audio/video cord.
• If you connect an S-video cord to the LINE IN (line in) 1 jack, set "Line1 Input" in "Video" setup to "S Video"
(page 85). If you connect an S-video cord to the LINE IN (line in) 3 jack, set "Line3 Input" in "Video" setup to
"S Video" (page 86).
Cable box/satellite receiver
AUDIO VIDEO
OUT OUT
S VIDEO
R L
S-video cord
(not supplied)
S VIDEO
R-AUDIO-L VIDEO
1
3
LINE IN
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
S VIDEO
COAXIAL
R-AUDIO-L VIDEO
IN
1
3
VHF/UHF OPTICAL LINE IN
ANT IN
TO TV
to antenna input
Y
R-AUDIO-L VIDEO S VIDEO P
B
P
R
COMPONENT
LINE OUT
VIDEO OUT
Wall
Antenna cable
(supplied)
TV
DVD (digital video
disc) recorder
~
AC IN
,continued 15