System; Recording Tv Programs Using The - Sony RDR-HX910 Operating Instructions Manual

b
Notes
• If a message indicating that the disc is full appears on
the screen, change the disc, or make available space for
the recording (HDD/DVD+RW/DVD-RW (hard disc
drive/digital video disc-rewritable, plus RW/digital
video disc-rewritable, minus RW) only) (page 75).
• Check that the clock is correctly set before setting the
timer recording. If not, the timer recording cannot be
made.
To record a satellite program, turn on the satellite tuner
and select the satellite program you want to record.
Leave the satellite tuner turned on until the recorder
finishes recording. If you connect equipment with a
timer function, you can use the Synchro Rec function
(page 55).
• Even if the timer is set for the same daily or weekly
program, the timer recording cannot be made if it
overlaps with a program that has priority. "
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings.
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• The Rec Mode Adjust function only works with a timer
recording. It does not function with Quick Timer or
Synchro Rec. In addition, the Rec Mode Adjust
function does not work when recording to the HDD
(hard disc drive) while "Auto Title Erase" is set to
"On."
48

Recording TV programs using the

VCR Plus+ (video cassette
recording plus) system
The VCR Plus+ (video cassette recording plus)
system is a feature that simplifies setting the timer.
Just enter the VCR Plus+ (video cassette
recording plus) number listed in the TV program
guide. The date, time, and channel of that program
are set automatically.
Check that the TV and guide channels are
correctly set in "Set VCR Plus+ Channels" in
"Settings" setup (page 92).
" will
Number
buttons,
SET (set)
CLEAR
(clear)
[TIMER]
(timer)
z REC
(recording)
1
Press [TIMER] (timer).
Timer - VCR Plus+
Set the timer by entering the PlusCode.
PlusCode
Standard
• If the "Timer – Standard" display appears,
press < to switch the display to "VCR
Plus+."
2
Press the number buttons to enter the
PlusCode (plus code) number, and press
SET (set).
• If you make a mistake, press CLEAR (clear)
and re-enter the correct number.
1 2 3
4 5 6
7 8 9
0
</M/m/,,
ENTER
(enter)
x REC STOP
(recording stop)
OK
Cancel