Sony RDR-HX910 Operating Instructions Manual page 88

3
Press INPUT SELECT (input select) on the
remote repeatedly to select "DV."
The front panel display changes as follows:
t
Channel number
L1 (line1)
L2 (line2)
L3 (line3)
DV (digital video)
4
Press REC MODE (recording mode) on the
remote repeatedly to select the recording
mode.
The recording mode changes as follows:
t
HQ (high quality)
HSP (high standard play)
SP (standard play)
LSP (long standard play)
LP (long play)
EP (extended play)
SLP (super long play)
SEP (super extended play)
For details about the recording mode, see
page 44.
5
Press TOOLS (tools) on the remote to
select "DV/D8 Audio Input," and press
ENTER (enter). Then, select the setting for
the audio input.
"Stereo1" (default): Records original sound
only. Normally select this when dubbing a DV
(digital video) format tape.
"Mix": Records both stereo 1 and 2.
"Stereo2": Records additional audio only.
Select "Mix" or "Stereo2" only if you have
added a second audio channel when recording
with your digital video camera.
You are ready to start dubbing. Select one of
the dubbing methods on the following pages.
88
z Hints
• You can turn off the recorder during dubbing. The
recorder completes dubbing even after being turned
off.
• You can adjust the settings for the recording picture
before recording. See "Adjusting the recording picture
quality and size" on page 49.
b
Notes
• You cannot connect more than one piece of digital
video equipment to the recorder.
• You cannot control the recorder using another device
or another recorder of the same model.
• You cannot record date, time, or the contents of the
cassette memory onto the disc.
• If you record from a DV (digital video)/Digital8 format
tape that is recorded in multiple sound tracks, such as a
tape with multiple sampling frequencies (48 kHz, 44.1
kHz, or 32 kHz), no sound or an unnatural sound will
be output when playing back the sampling frequency
switch point on the disc.
• In order to use this recorder's "Auto Chapter" setting
(pages 89, 90), be sure to correctly set the clock on your
digital video camera before shooting.
• The recorded picture may be momentarily affected if
the picture size of the source image changes, or if there
is nothing recorded on the tape.