B: Cable Box With An Antenna Output Only - Sony RDR-HX910 Operating Instructions Manual

B: Cable box with an antenna output only

With this hookup, you can record any channel on the satellite receiver or cable box. Be sure that the
satellite receiver or cable box is turned on.
To watch cable programs, you need to match the channel on the recorder (2ch, 3ch, or 4ch) to the antenna
output channel on the cable box (2ch, 3ch, or 4ch).
Wall
Antenna cable
(supplied)
to VHF/UHF OUT (very
high frequency/ultra
high frequency out)
b
Note
When using this connection, set "Antenna/Cable" under "Tuner Preset" in "Settings" setup to "Antenna" (page 92).
16
to VHF/UHF IN (very high
frequency/ultra high frequency in)
VHF/UHF
IN
VHF/UHF
IN
OUT
OUT
to antenna input
: Signal flow
Cable box
ANT IN
TO TV
DIGITAL COMPONENT
OUT VIDEO IN
LINE IN
PCM/DTS/
DOLBY DIGITAL
Y
R-AUDIO-L VIDEO S VIDEO
COAXIAL
1
P B
3
P
R
OPTICAL
TV
DVD (digital video disc) recorder
COMPONENT
VIDEO OUT
LINE OUT
Y
R-AUDIO-L VIDEO S VIDEO
1
P B
2
P
R
~
AC IN