Setting Up The Vcr Plus ® (Video Cassette Recording Plus) System - Sony RDR-HX910 Operating Instructions Manual

TV Type
If you have a wide-screen TV, select "16:9."
If you have a standard TV, select either "4:3
Letter Box" (shrink to fit) or "4:3 Pan Scan"
(stretch to fit). This will determine how
"wide-screen" images are displayed on your
TV.
Audio Connection
If you connected an AV (audiovisual)
amplifier (receiver) using either a digital
optical or coaxial cord, select "Yes: DIGITAL
OUT" and set the digital output signal
(page 97).
3
Press ENTER (enter) when "Finish"
appears.
"Easy Setup" is finished.
To return to the previous step
Press O RETURN (return).
z Hint
If you want to run "Easy Setup" again, select "Easy
Setup" from "SETUP" in the System Menu (page 102).
b
Note
If you use an S-video cord to connect your cable box or
satellite receiver, set "Line1 Input" or "Line3 Input" in
"Video" setup to "S Video" (page 96).
26
Setting Up the VCR Plus
(video cassette recording
plus) System
Setting up your recorder involves coordinating the
TV channel number (the number you turn to on
your TV or recorder to watch a program) with the
guide channel (the number that's assigned to that
channel in your TV program guide).
To find the guide channel numbers, look at the
"Channel Line-up Chart" in the program guide for
your area that features VCR PlusCode (video
cassette recording plus code) numbers.
Use the Channel Line-up Chart to coordinate the
guide channel number with the TV channel
number. For example, if HBO is listed in the
Channel Line-up Chart as channel 33, and the
recorder receives HBO on channel 5, coordinate
these numbers using the following procedure.
Number
1
buttons, SET
4
(set)
7
SYSTEM MENU
(system menu)
O RETURN
(return)
1
Press SYSTEM MENU (system menu) while
the recorder is stopped.
2
Select "SETUP," and press ENTER (enter).
SETUP
Settings Tuner Preset
Video Set VCR Plus+ Channels
Audio Clock
Features Language
Options
Easy Setup
®
2 3
5 6
8 9
0
</M/m/,,
ENTER
(enter)