Write Dsb - Sony SAL1680Z Service Manual

4-12. WRITE dSB

Equipment
• Personal Computer
• Finished Inspection JIG (AC 100 V only)
• Lens Adjustment Program (ActuatorChecker)
1. Preparations
1) Connected to equipment with checking lens. (Refer to Section 4-1-3.)
2) Start up of "ActuatorChecker".
[Set up]
3) Click , and perform the initial setting. (Refer to Section 4-1-4.)
2. Checking Method
[Write dSB]
1) Click the .
2) The Serial window appears. Input the lens serial number.
Note: [OK]
When is clicked without inputting the serial number, the date executed is displayed on the completion window of each item.
Fig.4-12-2
3) The "Select dsb" window appears.
4) Being based on the image point shift amount calculated by "4-7. FOCUS-SHIFT CHECK/ADJUSTMENT (APERTURE (AMOUNT
OF SPHERICAL ABERRATION))", select the button and perform the Write dSB.
Note:
• Writing dSB takes time for about 20 seconds.
• Do not remove the lens while writing it. The data of the lens becomes abnormal, and the exchange of substrates of main
flexible unit is needed.
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
Fig.4-12-1
Fig.4-12-3
DT 16-80mm F3.5-4.5 ZA)
*
4-50