Sony SAL1680Z Service Manual page 35

3. Inserting the tip of 4th operation plate in the linear guide groove, assemble the rear barrel assembly into the outer tube.
4. Select the 3rd lens block guide roller fitting to the grooves of zoom cam ring and outer tube and install it in the guide grooves. Then,
tighten the 3rd lens block guide pin of which the screwed portion is applied with the adhesive bond (B-40). (Install at three locations.)
3rd Lens Block
Guide Pin
3rd Lens Block
Guide Roller
Apply the adhesive
bond (B-40)
Par Number
3-197-211-01
3-197-212-01
3-197-213-01
3-197-216-01
3-197-217-01
3-197-218-01
3-197-219-01
3-197-220-01
3-197-221-01
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
Apply the adhesive bond (B-40)
Rear Barrel Assy
3rd Lens Block Guide Roller
3rd Lens Block Guide Pin
Part Name
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Roller
3rd Lens Block Guide Pin
Apply the adhesive bond (B-40)
3rd Lens Block Guide Roller
Outer Tube
Dimension (mm)
Diameter of D Diameter of d
4.81 4.61
4.81 4.62
4.81 4.63
4.82 4.61
4.82 4.62
4.82 4.63
4.83 4.61
4.83 4.62
4.83 4.63
DT 16-80mm F3.5-4.5 ZA)
*
D
d
HELP