Sony SAL1680Z Service Manual page 90

Lens for dslr camera (vario-sonnar dt 3.5-4.5/16-80 za) (vario-sonnar t* dt 16-80mm f3.5-4.5 za)
Hide thumbs Also See for SAL1680Z:
Table of Contents

Advertisement

5) At the position where the sound beeps, tighten two screws loosened, apply the adhesive bond (B-10) to the screws.
Apply the adhesive bond (B-10)
Fig.4-11-5
6) Perform "4-11-2. Focus Brush Position Check" and "4-11-3. Focus Brush Pattern Check"
3. In case of error display in the Search Focus Adjustment Point
1) When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window, and
perform "2. Adjusting Method"again.
2) If the "NG" appears again, thought cause communication error of the finished inspection JIG and checking lens, confirm or perform
the following.
• Deformation of focus brush.
• Grime of pattern.
• Grime of contact flexible.
• Improper connection of connector.
• Improper of BL contact.
• Disconnection of mirror box fixture.
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
Fig.4-11-6
Fig.4-11-7
4-44
DT 16-80mm F3.5-4.5 ZA)
*

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents