Pattern Check - Sony SAL1680Z Service Manual

4-10. ZOOM BRUSH POSITION CHECK/ADJUSTMENT AND PATTERN CHECK
4-10-1. Zoom Brush Position Adjustment (Search Zoom Adjustment Point)
Equipment
• Personal Computer (PC)
• Finished Inspection JIG (AC100 V only)
• Lens Adjustment Program
Note: Lens Adjustment Program is downloadable from the ESI homepage.
1. Preparations
1) Remove parts indicated in Fig,4-10-1 from the lens unit.
Zoom Rubber Ring
Brush Cover D
Polyester Tape
Fig.4-10-1
2) Connected to equipment with checking lens. (Refer to Section 4-1-3.)
3) Start up of "ActuatorChecker.exe".
[Set up]
4) Click , and perform the initial setting. (Refer to Section 4-1-4.)
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T DT 16-80mm F3.5-4.5 ZA)
*
4-34