2-1.
DISASSEMBLY
2-1-1. LENS BLOCK
EXPLODED VIEW
2 Front Decoration
Plate
HELP01
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
1 Focus Rubber Ring
Note:
• About the front decoration plate :
Be sure avoiding replacement of front decoration
plate as far as possible. If replacement of it should
be need, you convey the message to your user
that changing of the "Carl Zeiss Serial No." is
needed, and then you may obtain user's
agreement, and it replace.
3 1st Lens Block
4 Light Shield Plate A
5 2nd Lens Block
(See page 2-3.)
0 3rd Lens Block
Note:
• Remove the 3rd Lens Block :
After replacing the fixed screw of universal
wrench, remove the lens block using the
9 3-4 Adjustment Washer
8 4th Lens Block
7 Aperture Hold Ring
6 Light Shield Plate B
DT 16-80mm F3.5-4.5 ZA)
*
2-2