Sony SAL1680Z Service Manual page 26

HELP14
Grease (G-15): J-6082-619-A
1. Install the coupler adjustment washer to the location shown in the figure.
2. Apply the grease (G-15) to the gear C.D block and the indicated portion of AF coupler.
And install them.
Apply the grease (G-15)
(Gear)
Apply the grease (G-15)
(Side edge of gear)
Apply the grease (G-15)
(Shaft)
HELP15
Set the focus ring to the ∞ side.
1.
2. Peel off the polyester tape fixing the main flexible unit shown in the figure and lift up a little the main flexible unit with tweezers.
3. Install the focus brush with two screws.
Note:
Install the focus brush in the direction shown in the detailed figure.
Main Flexible Unit
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
AF Coupler
Apply the grease (G-15)
(Top of shaft)
Coupler Bush
Apply the grease (G-15)
(Gear)
Gear C.D Block
Coupler Adjustment Washer
Screw
Focus Brush
Polyster Tape
DT 16-80mm F3.5-4.5 ZA)
*
HELP