Sony SAL1680Z Service Manual page 33

Ver. 1.5 2008.09
The changed portions from
Ver. 1.4 are shown in blue.
HELP23
Anti-diffusion agent: J-6082-611-A
Cleaning liquid:
1. Clean the indicated portion of outer barrel with gauze dipped in the cleaning liquid.
2. Fold the main flexible unit at the locations shown in the figure. (8 locations)
Fold back this portion
and then affix it to the
inner side of outer barrel
3. Apply the anti-diffusion agent (A-20) to the indicated portion of outer barrel.
4. Affix the main flexible unit and the friction sheet C to the indicated portion of outer barrel.
5. Affix the polyester tape cut as instructed to the location shown in figure.
Friction Sheet C
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
J-6082-622-A
7
6
Friction Sheet C
Flex Setting
Tape C
Flex Setting
Tape D
Flex Setting
Tape E
Polyester Tape
(4x20mm)
8
5 4 3
2
1
Outer Barrel
Apply the anti-diffusion
agent (A-20)
(All circumference)
Flex Setting Tape B
Flex Setting Tape-A
Polyester Tape
(4x20mm)
Main Flexible Unit
DT 16-80mm F3.5-4.5 ZA)
*
This figure indicate from
beneath the outer barrel
Affix the flex setting tape B on the
outer barrel with bump it wall
Flex Setting Tape B
Fold back this portion on the main
flexible unit and then affix it to the
inner side of outer barrel
HELP