Write Dsb - Sony SAL135F18Z Service Manual

4-11. WRITE dSB

Equipment
• Personal Computer
• Finished Inspection JIG (AC 100 V only)
• Lens Adjustment Program (ActuatorChecker)
1. Preparations
1) Connected to equipment with checking lens. (Refer to Section 4-1-3.)
2) Start up of "ActuatorChecker".
[Set up]
3) Click
2. Checking Method
[Write dSB]
1) Click the
2) The Serial window appears. Input the lens serial number.
Note:
When
Fig.4-11-2
3) The "Select dsb" window appears.
4) Being based on the image point shift amount calculated by "4-5. FOCUS-SHIFT CHECK/ADJUSTMENT (APERTURE)", select the
button.
5) When the Write dSB finishes normally, "OK" appears on the pop-up window.
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
, and perform the initial setting. (Refer to Section 4-1-4.)
.
Fig.4-11-1
[OK]
is clicked without inputting the serial number, the date executed is displayed on the completion window of each item.
Fig.4-11-4
135mm F1.8 ZA)
*
Fig.4-11-3
4-41