Sony SAL1680Z Service Manual page 36

HELP25
1. Install the focus coupling barrel to the focus lens holder while inserting three outer projections of focus operation ring in the cut
portions of focus lens holder.
2. Install the 2nd lens holder to the focus operation ring while inserting three projections at the inner side of coupling barrel into three
grooves of 2nd lens holder.
3. Rotate fully the coupling barrel of focus coupling barrel assy assembled in step 3 in the arrow direction and turn it back a little so that
the left end of projection aligns with the right end of projection at the screw hole of focus lens holder as shown in the figure.
Focus coupling barrel
Focus coupling barrel assy
4. Rotate fully the zoom cam ring of outer tube in the arrow direction.
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
Zoom Cam Ring
Outer Tube Block
Projection
Align position
Projection of screw
hole
DT 16-80mm F3.5-4.5 ZA)
*
HELP