Sony SAL1680Z Service Manual page 38

HELP26
Adhesive bond (B-40): J-6082-614-A
1. Aligning the right end of 4th operation plate installation part with the reference line shown in the figure, assemble the zoom cam ring
into the outer tube.
After assembling, confirm that the installation part of 4th operation plate locates at the side where the distance between legs is wider
as shown in the figure.
Zoom Cam Ring
4th operation plate
mounting position
Outer Tube
2. Tighten the 4th operation plate with the screw of which screwed portion is applied with the adhesive bond (B-40).
4th Operation Plate
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
Wide
Wide Narrow
4th Operation
Plate
Apply the adhesive bond (B-40)
4th operation plate mounting position
Reference Line
Narrow
DT 16-80mm F3.5-4.5 ZA)
*
HELP