Planet VIP-050 User Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Gateway
  5. VIP-050
  6. User manual

Planet VIP-050 User Manual

Internet telephony gateway
Hide thumbs
Table of Contents

Advertisement

Quick Links

Internet Telephony Gateway
VIP-050 / VIP-450
User's Manual
Rev 2.0

Advertisement

Table of Contents
loading

Related Manuals for Planet VIP-050

Summary of Contents for Planet VIP-050

  • Page 1 Internet Telephony Gateway VIP-050 / VIP-450 User’s Manual Rev 2.0...
  • Page 2 Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose.

  • Page 3: How To Use This Manual

    This manual was designed for the technical and non-technical users of PLANET Internet telephony gateway VIP-050 / VIP-450. It contains information about the functions of VIP and instructions for its installation, basic configuration and operation in related chapters, and introduces more advanced command line interface, firmware upgrade and appendix information.

  • Page 4: Important Safety Instructions

    Important Safety Instructions Before plugging VIP into an electrical outlet, carefully read all the installation instructions in Chapter For your own safety and the safety of your equipment, always take the following precautions: Follow instructions and warnings in the documentation. ·...

  • Page 5: Notation Conventions

    SIP Voice Gateway User’s Manual Light Emitting Diode Private Branch Exchange Public Switched Telephone Network PSTN Real-Time Transport Session Initialization Protocol Telephony Channel Identifier TCID TFTP Trivial File Transfer Protocol Telephony Interface Modules Telephone Network Voltage User Datagram Protocol Unshielded Twisted Pair Voice Activity Detection Wide Area Network Notation Conventions...

  • Page 6: Table Of Contents

    Chapter 1 Overview Features Networking Protocols Package Contents Front Panel Rear Panel Chapter 2 Installing VIP Network Requirements Installing VIP Connecting to the telephony devices Connecting to the Network Providing Power to VIP Assigning IP address to VIP Chapter 3 VIP Concepts How VIP Operates ATPM...
  • Page 7 SIP Voice Gateway User’s Manual 4.2.5 Channel Parameters 4.2.6 Network Connection 4.3 Configure System Settings 4.3.1 IP Settings 4.3.2 SIP Parameters Chapter 5 Troubleshooting Tips Chapter 6 Command Line Interface Connection through Serial Port Connection through Telnet Command Help Designating IP Address Designating Port Number Command Reference Utility Commands...
  • Page 8 SIP Voice Gateway User’s Manual Download Mode Commands Appendix C Factory Default Settings Preface viii...

  • Page 9: Chapter 1 Overview

    PBX system. PLANET VoIP (Voice over IP) system – VIP-050 / VIP-450 offer toll quality voice and real-time fax data over IP networks. With optimized SIP architecture, PLANET VIP series are ideal solution for various VoIP applications such as Headquarter and Branch Office communication, and IDD cost-effective solution.

  • Page 10: Package Contents

    LED Indicators The LED indicators on the front panel display the current status of VIP as described in the following table: Indicator Color Figure 1-1 VIP-050 Front Panel Figure 1-2 VIP-450 Front Panel Activity SIP Voice Gateway User’s Manual Indication...

  • Page 11: Rear Panel

    Rear Panel The rear panel of VIP-050 has two slots allowing the installation of up to two Telephony-Interface- Module (TIM) . Each module is equipped with 4 telephony interface ports. Depending on the type of the telephony interface module, the telephony interface ports may be connected to telephony de- vices, such as PBX, KTS, and telephone sets of central office.
  • Page 12 90~240VA 50~60H Note: For VIP-050, three modules available, VIP-FXS, VIP-FXO and VIP-E&M. Modules are not included, please consult your local dealer for the information of the modules. SIP Voice Gateway User’s Manual Slot A SLOT A ELITE-FXO VIP-050 Rear Panel...

  • Page 13: Chapter 2 Installing Vip

    Connecting to the telephony devices VIP-050 supports three types of TIM. One is FXO, FXS and the other is E&M. Each module has four ports for connecting to telephony devices. VIP-450 equips two FXO and two FXS interfaces to have the great flexibility of PBX connection (FXO), and telephone or FAX machine connection (FXS).

  • Page 14: Providing Power To Vip

    Providing Power to VIP To provide AC power to VIP complete the following steps: Turn the power switch on the rear panel of VIP to the off position. Connect one end of the power cord that came with VIP to the power receptacle on the rear panel.

  • Page 15: Chapter 3 Vip Concepts

    VIP User’s Manual VIP enables the transmission of voice and fax traffic over any IP network by digitizing voice and fax signals, encapsulating the information within IP packets, and then sending the packets across the IP network How VIP Operates The TIM inside VIP digitizes analog voice signals at 8 Kbps.

  • Page 16: Hunt Group

    Hunt Group Instead of directly mapping a phone number to a destination, the ATPM first maps the phone num- ber to a group of destinations known as a Hunt Group. A hunt group is a group of destinations that For example, the customer support group of a company might have 20 peo- are equivalent.

  • Page 17: Dtmf Relay

    SIP Voice Gateway User’s Manual Hunt Group Table The hunt group table maps a hunt group to a list of destinations. Hunt group sample Group id Type #Members ---------------------------------------------------------------------------- Destination Table The destination table maps a destination to a telephony port or the IP address of a remote VIP. Destination table sample Dest id Mode...

  • Page 19: Chapter 4 Configuring Vip From A Web Browser

    3. If a line like the one highlighted ("TCP/IP -> Network Card”) is not listed , select Add-Protocol- Microsoft-TCP/IP-OK to add it. 4. Select Properties for the “TCP / IP -> Network card” entry. You will see a screen like the following: Configuring VIP from a Web Browser...
  • Page 20 5. On the IP Address table, enter values as follows: · Specify an IP address set ON. · IP Address: 192.168.0.2 · Subnet Mask: 255.255.255.0 Restart your PC and Start your WEB browser. 6. In the Address box, enter the following: http://192.168.0.1 (default IP address of the Voice Gateway) 7.

  • Page 21: Dial Plan/ Dial Settings

    SIP Voice Gateway User’s Manual 4.1.1 Dial Plan/ Dial Settings Main Menu Function Briefings 1.Dial Plan Settings, which helps you configure the dial plan. You should complete the dial plan work sheets before working on this menu. 2.View System Configurations, which includes the specific information related to version, network, SIP, coder, and the channel of the gateway you are using.
  • Page 22 4.1.1.1 Phone number Please select Main Menu\Dial Plan\Phone/Hunt Group/Destination Settings, we can find Phone/Hunt Group/Dest. Setting Menu. We are doing VIP telephone address table manage- ment. We can add (delete, find or list) desired telephone number mapping to hunt group at this menu. To list the phone numbers, click on “List”...
  • Page 23 SIP Voice Gateway User’s Manual To delete / find a Telephone, select the option and telephone, you can key in the phone number to find or delete. The right bottom screen will show the result. Configuring VIP from a Web Browser...
  • Page 24 4.1.1.2 Hunt Group Please select Main Menu\Dial Plan\Phone/Hunt Group/Destination Settings, we can find Phone/Hunt Group/Dest. Setting Menu. We are doing VIP hunt group table management. We can add (delete, find or list) desired hunt group ID mapping to destination ID at this menu. If you want to make the port calls to the secondary receiver, you can click one “More Destinations”...
  • Page 25 SIP Voice Gateway User’s Manual 4.1.1.3 Destination IP/ Destination Channel Please select Main Menu\Dial Plan\Phone/Hunt Group/Destination Settings, we can find Phone/Hunt Group/Dest. Setting Menu. We are doing VIP destination table management. One is Remote Destination IP, one is Configuring VIP from a Web Browser Remote Host Name and the other is Local Destination Channel.
  • Page 26 VIP User’s Manual We can add (delete, find or list) desired destination ID mapping to Remote Destination IP, Domain Name or Local Destination Channel at this menu. Please back to Dial Plan Menu. 4.1.1.4 Common Parameter Please select Main Menu\Dial Plan\Common Parameter Settings Configuring VIP from a Web Browser...

  • Page 27: Clear Dialplan

    SIP Voice Gateway User’s Manual This Common Parameter Settings is the same as previous ATPM system parameters description. . 4.1.2 Clear DialPlan Please select Main Menu\Dial Plan\Clear All Dial Plan Settings before. However, the 'Clear All' is Clear All Dial Plan Settings will clear all the settings you made only temporary if you do not store to the Flash Memory afterwards.

  • Page 28: Restore Dialplan

    VIP User’s Manual 4.1.3 Restore DialPlan Please select Main Menu\Dial Plan\Restore All Dial Plan Settings Retrieve all dial plan settings from the flash memory. All temporary settings will be cleared. 4.1.4 Save to NVRAM Please select Main Menu\Dial Plan\ Save to NVRAM Ready to store Dial Plan settings to Flash Memory Please Back To Main Menu Configuring VIP from a Web Browser...

  • Page 29: View System Configurations

    SIP Voice Gateway User’s Manual 4.2 View System Configurations Please select Main Menu\View System Config. View System Config. Function Briefings. 1.Firmware Version Information, which shows the versions of each firmware component 2.Network Settings, which shows the IP-related settings, and the status of associated management tools 3.SIP Parameter Settings, which shows the SIP-related parameters associated with the gateway...

  • Page 30: Voice Coder Type

    SIP Addr Configuration: UDP ctl addr = 192.168.0.99/5060 RTP data addr = 192.168.0.99/2070 Domain name server = 168.95.192.1 Info switch is off nat_call is on auto_reg is off outboundproxy : None 4.2.3 Voice Coder Type Please select Main Menu\View System Config.\Coder Type The Voice Coder For Each Line Module: Voice coder is G.723 for Line Module 1.

  • Page 31: Channel Parameters

    SIP Voice Gateway User’s Manual 4.2.5 Channel Parameters Please select Main Menu\View System Config.\Channel Parameters This command can show the desired channel setting of VIP. Configuring VIP from a Web Browser...

  • Page 32: Network Connection

    4.2.6 Network Connection Please select Main Menu\View System Config\Network Connection This command can display the type of connection currently enabled in VIP. 4.2.6.1 DHCP Settings Display current DHCP status in VIP Command Line Interface reference: net set dhcp net set dhcp command configures VIP to be DHCP client in order to obtain TCP/IP related pa- rameters from ISP while VIP is deployed in DHCP environment.
  • Page 33 SIP Voice Gateway User’s Manual 4.2.6.2 PPPoE Settings Display current PPPoE status in VIP Command Line Interface reference: net set pppoe The net set pppoe command configures PPPoE related parameters while VIP is deployed in PPPoE environment. Syntax Description Turn on PPPoE client Turn off PPPoE client username PPPoE connection username provided by ISP...
  • Page 34 PPPoE connection password provided by ISP password fix_ip Fixed IP address provided by ISP If PPPoE client is enabled/disabled, VIP has to be rebooted to make the PPPoE service started/stopped. VIP User’s Manual Configuring VIP from a Web Browser...
  • Page 35 SIP Voice Gateway User’s Manual 4.2.6.3 DDNS Settings Display current DDNS status in VIP Command Line Interface reference: net set dyndns Configuring VIP from a Web Browser...

  • Page 36: Configure System Settings

    DDNS service can help users to find each other in dynamic/static IP environment, and enable two VIPs call each other with registered host names. To be fully functional, DNS server MUST be added into SIP configuration while DDNS service is enabled. DDNS clients supported in VIP are If VIP DDNS client is enabled, users MUST register a DDNS name from the sites listed above be- fore proceeding any further.
  • Page 37 SIP Voice Gateway User’s Manual System Config. Settings Function Briefings Settings, which allows one to set the gateway's IP address, its subnet mask, and its Default Gateway IP address. SIP Parameter Settings, which allows one to set the SIP parameters, such as communication ports, SIP registration settings, outbound proxy server settings ……...

  • Page 38: Ip Settings

    VIP User’s Manual 4.3.1 IP Settings Please select Main Menu\Configure System Settings\IP Settings This screen can setup your VIP IP Address, Subnet Mask and Default IP Gateway Address. These values will be valid after VIP reboot. 4.3.2 SIP Parameters Please select Main Menu\Configure System Settings\SIP Parameter Settings There are SIP Configuration Settings, Registration Server Settings, Outbound Proxy Sever configura- tions, Domain name server configurations, and Other settings..
  • Page 39 SIP Voice Gateway User’s Manual 4.3.2.2 SIP Registration Server settings Please select Main Menu\Configure System Settings\SIP Parameter Settings\SIP Registration Server Settings Configuring VIP from a Web Browser...
  • Page 40 VIP User’s Manual 4.3.2.2 SIP Outbound Proxy Server Settings Please select Main Menu\Configure System Settings\SIP Parameter Settings\SIP Outbound Proxy Server Settings 4.3.2.3 SIP Domain Name Server Settings Please select Main Menu\Configure System Settings\SIP Parameter Settings\SIP Domain Name Server Settings Configuring VIP from a Web Browser...
  • Page 41 SIP Voice Gateway User’s Manual 4.3.2.4 Other SIP Settings Configuring VIP from a Web Browser...

  • Page 42: Chapter 5 Troubleshooting Tips

    VIP User’s Manual This section provides solutions for problems you may possibly encounter while installing and connect- ing your Internet Telephony Gateway. Power (PWR) LED is not illuminate Check the power adapter connection. If the power adapter or power cord is connected to the gateway, check that the cord is securely plugged into the power socket on the rear of the console.

  • Page 43: Chapter 6 Command Line Interface

    SIP Voice Gateway User’s Manual VIP has a built-in command line interpreter and provides users a Command Line Interface (CLI). You can configure VIP by entering commands from the CLI. You can access the CLI from a VT-100 terminal or terminal emulator connected to the RS-232 port on the front panel or through a Telnet session.

  • Page 44: Command Help

    Task From the remote host, enter the telnet command followed by the IP address of VIP you want to ac- cess. When VIP prompts “Login:”, enter the user name “administrator” When VIP prompts “Password:”, enter the pass- word. The default password is “123” unless a password was previously established using the net set user_pw command (Refer to the section describing net set user_pw command later in this...

  • Page 45: Command Reference

    SIP Voice Gateway User’s Manual 6.6 Command Reference The following table list the CLI command in alphabetic order. Command atpm Dial plan management command clrscr Clear screen config Configuration management command download Download new revision code image from TFTP server help Display help screen Set or display network parameters...

  • Page 46: Utility Commands

    6.7 Utility Commands clrscr The clrscr command to clear the screen Syntax Description This command has no arguments or keywords download Use the download command to enter download mode for reading code image from a TFTP server and program it to flash memory. Refer to 0 for detailed information on how to upgrade the system software.

  • Page 47: Network Commands

    SIP Voice Gateway User’s Manual 6.8 Network Commands net reset Use the net reset command to reset VIP. The CLI will prompt you to confirm the command be- fore resetting VIP. Syntax Description This command has no arguments or keywords net set gateway ip_addr Use the net set gateway command to assign a default gateway (router) for VIP.
  • Page 48 The new IP address will not take effect until VIP is reset. net set ip_preced ip_preced VIP allows you to set the 8-bit Service Type field in the IP header for all the voice packets it sends out. The Service Type field is broken down into five subfields, among which four subfileds are user configurable.

  • Page 49: Syntax Description

    SIP Voice Gateway User’s Manual Enable the 10/100 Mbps auto-negoriation capablity. auto net set user_pw password password Use the net set user_pw command to change the password for Telnet user. Syntax description The new password. The password must be equal to or less than 7 password alphanumeric characters.
  • Page 50 HTTP server = enabled Telnet server = enabled ****************************************************** ITG> net show hwstat The net show hwstat command displays the hardware configuration of VIP. Syntax Description This command has no arguments or keywords Example The following example shows how to display hardware configuration: ITG>net show hwstat <Enter>...
  • Page 51 SIP Voice Gateway User’s Manual net set dyndns DDNS service can help users to find each other in dynamic/static IP environment, and enable two VIPs call each other with registered host names. To be fully functional, DNS server MUST be added into SIP configuration while DDNS service is enabled.

  • Page 52: Configuration Management Commands

    6.9 Configuration Management Commands The configuration management commands allow the user to set values for system configuration pa- rameters. In addition, it provides mechanisms to allow a user to control when new parameter val- ues are put in use. The CLI maintains three areas where the parameters are stored: Ÿ...
  • Page 53 SIP Voice Gateway User’s Manual show sip The show SIP command displays the settings of the parameter that are related to SIP signaling protocol. Syntax Description This command has no arguments or keywords Example The following example shows how to display the SIP parameters: ITG>show sip SIP Addr Configuration: UDP ctl addr...
  • Page 54 show sip nat_call - Displays nat_call switch show sip outboundproxy - Displays the outbound proxy set sip reg add - used to add registration information set sip reg add [reg_num] [expires] [#registrar] [ip] [port] {name | 0} {passwd | 0} {ip port …} Syntax description reg_num the phone number to be registered...
  • Page 55 SIP Voice Gateway User’s Manual proxy svr nwa set sip actreg - used to send out the registration set sip actreg set sip dns_ip - used to set the domain name server. The IP domain should be in numerical format set sip dns_ip [ip] Syntax description <x.x.x.x>...

  • Page 56: Voice Coding Profile Configuration Commands

    6.10 Voice Coding Profile Configuration Commands Coding profile is used to store coding parameters for voice and fax coding p that can be used by te- lephony port on VIP. VIP has built-in coding profiles, each having a unique profile ID and parame- ters for specific voice, fax or modem coder.

  • Page 57: Voice Coding Profile Configuration Commands

    SIP Voice Gateway User’s Manual set coding profile_id cp_tone_detect This command is used to specify a secondary level of control of call progress tone detection. If the call progress detection control for a telephony port is set to "As per coding profile" (refer to com- mand “set port port cp_tone_det_ctrl”), this parameter determines if detection is to be enabled or...
  • Page 58 Enable adaptive playback. Disable adaptive playback. set coding profile_id dtmf_relay VIP supports DTMF Relay, in which DTMF tones are detected during voice processing, encoded into SIP-UserInformation packets and conveyed to the remote VIP via the SIP call control band. This com- mand is used to enable or disable the DTMF Relay feature.
  • Page 59 SIP Voice Gateway User’s Manual set coding profile_id nom_delay Syntax description Value in milliseconds. Delay set coding profile_id vad This command is used to enable/disable the Voice Activity Detector (VAD) for a coding profile. Syntax description Enable VAD. Disable VAD. set coding profile_id vad_thresh This command is used to set threshold level for the VAD for a coding profile.

  • Page 60: Dial Plan Management Commands

    Size of the Voice Information Field (VIF), in bits, for a voice coder are related to the coding type and the rate the voice coder samples a voice frame (the packet time), as shown in the table above. sizes of a coder of values other than those shown in the table are not valid. 6.11 Dial Plan Management Commands Among the command sets supported by the CLI, the dial plan management commands are the most sophisticated.
  • Page 61 SIP Voice Gateway User’s Manual Database Update Control Commands atpm done The atpm done command ends the atpm table update session and re-enables the address transla- tion. Syntax description This command has no arguments or keywords atpm erase The atpm erase command erases the dial plan database from the non-volatile memory. Syntax description This command has no arguments or keywords atpm purge {all|addr|dest|hunt}...
  • Page 62 atpm store [erase] The atpm store command store all atpm tables into non-volatile memory. Syntax description (Optional) Erase the non-volatile before storing the dial plan data- erase base. This option is not recommended except the very first time you use the atpm store command. Hunt Group Table Management Commands atpm hadd hunt_group_id {1|2} dest_id [desi_id2] …...
  • Page 63 SIP Voice Gateway User’s Manual Syntax description ID of the hunt group to be displayed. hunt_group_id atpm hlist The atpm hlist display all entries in the hunt group table. Syntax description This command has no arguments or keywords Example ITG>atpm hlist Group id Type #Members ------------------------------------------------------------------- ITG>...

  • Page 64: System Commands

    atpm adel tel# The atpm adel command deletes an entry from the atpm address table. Syntax description Number of a previously added entry to be deleted from the atpm ad- tel# dress table. atpm afind tel# The atpm afind finds and display an entry in the address table. Syntax description Number of a previously added entry in the atpm table to be displayed.

  • Page 65: Tel Commands

    SIP Voice Gateway User’s Manual ITG>atpm slist System Info: Total dial time = 30000ms, First digit wait = 10000ms, Interdigit wait = 5000ms, Dial term digit = None ITG> atpm sys dial_time 1st_digit_wait inter_digit_wait [dial_term_digit] Use the atpm sys command to set the time constraints for collection of dial digits. Syntax description The maximum time, in millisecond, allowed for entry of the entire dial_time...
  • Page 66 tel set pcm_gain_level {1|2|3|4|5} The FXO ports might be connected to central office switch or PBX via local loop which may of as long as several miles. For compensating signal distortion in the local loop, VIP’s PCM codec is de- signed in such a way that users might adjust it gain level before transmitting analog signal to the lo- cal loop.

  • Page 67: Chapter 7 Upgrading And Resetting Vip

    VIP User’s Manual VIP-450 is able to have system functionality enhancement via software upgrade. This must be oper- ated in upgrade mode. In firmware upgrade mode, limited commands allow users to read new revision codes from a remote TFTP server and write into the built-in flash non-volatile storage. To enter download mode, either Telnet or Console (RS-232) connection can take the job, and a TFTP server is required by VIP to complete firmware upgrade process.

  • Page 68: Tftp Server Configuration

    TFTP server configuration 1. Execute TFTP server program, assign firmware file location, and save the path if necessary. (In this sample datagram, the file is assigned in c:\) (This part might vary on different kind of TFTP server.) 2. Allocate VIP firmware file in the directory, and apply the modification (if required). Note: TCP port 69 is required for TFTP access.
  • Page 69 SIP Voice Gateway User’s Manual ITG>download ============================== WARNING ============================== * Entering download mode will hang up all telephone connections * and all the configuration settings will lose. * Be certain all the configuration settings have been saved. ======================================================================= Do you want to enter download mode now (y/n)? [n] Boot loader V4.12 Loading TFTP loader...
  • Page 70 Console session a) Connect VIP through the 9-pin RS232 female console (No password required) Under ITG> prompt, insert command: b) Insert command: “start” and answer questions on screen to proceed firmware upgrade. c) When VIP prompts downloading firmware file into EEPROM, insert “y” to continue. d) Wait till firmware is fully loaded into VIP, insert “quit”...
  • Page 71 SIP Voice Gateway User’s Manual Trouble Shooting Tips If following error (TFTP timeout ** Internet Telephony Gateway TFTP Loader Ver 4.10 ** EITGLoader>start IP address of the TFTP server? [192.168.0.7] File name? xyz123.imz Starting download file: xyz123.imz TFTP device open failed. - Download another file (y/n)? [n] Possibility: a) Network connection is not correctly configured...

  • Page 72: Cli Commands In Download Mode

    CLI Commands in Download Mode Under download mode, the CLI supports the following commands: Command Display help screen help Terminate download mode, switch to normal operation mode. quit Change IP parameter start Start downloading code from TFTP server The following section describes each of the commands. help The help command lists the top-level commands.

  • Page 73: Restore Default Configuration

    SIP Voice Gateway User’s Manual set mask ip_mask Use the set mask command to set the IP subnet mask for VIP. Syntax description The subnet mask of your network. ip_mask Note The new setting will not take effect until VIP is reset. start Use the start command to start downloading code from TFTP server.
  • Page 74 A sample is attached below for reference. ITG>config erase The system configuration data will be erased from non-volatile storage permanently. Are you sure to erase it (y/n)? [n] System configuration records erased from flash ITG>net reset ============================== WARNING ============================== * Restarting the system will hang up all telephone connections * and all the configuration settings will lose.
  • Page 75 SIP Voice Gateway User’s Manual Dialplan configuration default parameters: a) Log on VIP via telnet or console connection. b) At the ITG prompt, insert following commands: ITG>atpm erase ITG>net reset (Answer ”y” to reboot machine.) After rebooting, logon VIP. At the ITG> prompt, insert: atpm store to restore Dialplan default value into VIP.

  • Page 77: Appendix A Technical Specifications

    Technical Specifications Appendix A Technical Specifications VIP-450: 2 ports loop start FXO, 2 ports loop start FXS VIP-050: 4 ports loop start FXO, 4 ports loop start FXS (Up to two modules per unit) 1 10/100Base-T, auto sensing, RJ45 G.711 PCM 64kbps (A-law and μ-law) G.723.1A ACELP/M-MLQ (5.3, 6.3kbps)

  • Page 78: Console Port

    Compliances Mounting A.2 Console Port The console port uses a DB-9 RS-232 connector. The supplied straight-through RS-232 cable con- nects the console port of VIP to a console PC or terminal. Pinout for the port is described in the fol- lowing table.

  • Page 79: Fxo Port Pin Assignments

    SIP Voice Gateway User’s Manual TxD- Not connected Not connected A.4 FXO Port Pin Assignments The FXO Telephony Interface Module has 4 RJ11C/W modular jacks. The following diagram and table show the assignments of the pin for the RJ11 port. RJ-11 pin Signal Not connected...
  • Page 80 A.6 FXO Card Technical Specifications Signaling: No. of channels: Interface Connectors: Line Impedance : Insertion Loss: Frequency Response: Return Loss: Input Level adjustment: -6 dB to +6 dB Output Attenuation: Longitudinal Balance: A.7 FXS Card Technical Specifications Signaling: No. of channels: Interface Connectors: Line Impedance : Insertion Loss:...

  • Page 81: Appendix B Cli Commands

    VIP User’s Manual B.1 Normal Mode Commands Command atpm aadd Add an entry to the address table atpm adel Delete an entry from the address table atpm afind Find and display an entry in the address tble atpm alist Display all entries in the address table atpm dadd Add an entry to the destination table atpm ddel...
  • Page 82 net reset Reset the system net set gateway Set default gateway’s IP address net set http Turn on/off HTTP server net set ip Set IP address net set ip_preced Set IP precedence bits net set mask Set IP subnet mask net set speed Select Ethernet link speed net set user_pw...
  • Page 83 The following table lists the settings of certain parameters before VIP is shipped. Network IP address IP subnet mask Default gateway IP precedence Ethernet link speed User ID for HTTP browser and Telnet client login Password for HTTP browser and Telnet access login User name for Telnet session in download mode Password for Telnet session in download mode HTTP server...

This manual is also suitable for:

Vip-450

Table of Contents