Konica Minolta BIZHUB 600 User Manual page 38

Scanning Documents
No. Part Name
7 [Copy] key
8 [Reset] key
9 [Interrupt] key
10 [Stop] key
11 [Start] key
12 Main Power indicator
13 Data indicator
14 [Proof Copy] key
15 Keypad
16 [C] (clear) key
17 [Mode Check] key
18 [Utility/Counter] key
19 [Mode Memory] key
20 Contrast dial
21 [Enlarge Display] key
22 [Accessibility] key
23 [Help] key
bizhub 750/600
Description
Press to enter Copy mode. (As a default, the
machine is in Copy mode.) While the machine is in
Copy mode, the indicator on the [Copy] key lights
up in green.
For details, refer to the User's Guide [Copy Opera-
tions].
Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
Press to enter Interrupt mode. While the machine is
in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message "Now in
Interrupt mode." appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key
again.
Press the [Stop] key during scanning to stop the
scan operation.
Press to start scanning. When this machine is ready
to begin scanning, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press to restart a stopped job.
Lights up in green when the machine is turned on
with the auxiliary power button.
Flashes in green while a print job is being received.
Lights up in green when data is being printed.
This key is not used in scanner mode.
Use to type in various values.
Press to erase a value (such as the number of a
zoom ratio, or a size) entered using the keypad.
Press to display screens showing the specified
settings.
Press to display the Utility screen and Meter Count
screen.
This key is not used in scanner mode.
Use to adjust the contrast of the touch panel.
Press to enter Enlarge Display mode.
Press to display the screen for specifying user
accessibility functions.
Press to display the Help Main Menu screen, where
descriptions of the various functions and details of
operations can be displayed.
2
2-3