Konica Minolta BIZHUB 600 User Manual page 146

Specifying Settings From the Control Panel
6
Touch [Destination].
– To select from registered destinations:
Check that [Select from Address Book] is selected, touch the but-
ton for the desired destination type, and then select the destina-
tions to be registered.
– To enter the destinations directly:
Touch [Direct Input], touch the button for the desired destination
type, and then enter the destination to be registered.
7
Touch [Close].
– To register scan settings, touch [Yes] beside "Scan Setting". For
details on the scan settings, refer to "Specifying the Scan Settings"
on page 2-43.
– To register communication settings, touch [Yes] beside "Communi-
cation Setting". Specify the file name for saving the file and e-mail
notification settings.
8
Touch [OK].
The program destination is registered.
Note
The registration cannot be completed unless settings have been speci-
fied for "Name" and for "Destination", "Scan Setting", or "Communica-
tion Setting".
!
Detail
To check the registered destination, touch the button for the destination,
and then touch [Check Setting].
To change the registered destination settings, touch the button for the
desired destination, and then touch [Edit].
To delete the registered destination, touch the button for the desired des-
tination, and then touch[Delete].
bizhub 750/600
3
3-25