Program Default - Konica Minolta BIZHUB 600 User Manual

3

Program Default

The default screen that appears in the Program tab in Scan mode can be
specified. (Default setting: PAGE1)
1
In the User Setting screen, touch [2 Display Setting].
– To display the User Setting screen, refer to page 3-7.
2
Touch [3 Scan Basic Screen Default Setting].
3
Touch [Program Default].
4
Touch the button for the desired setting.
– Touch [
screen.
5
Touch [OK].
Note
To cancel changes to the setting, touch [Cancel].
3-32
Specifying Settings From the Control Panel
] or [ ], and then touch the button for the desired
bizhub 750/600