Konica Minolta BIZHUB 600 User Manual page 79

2
The settings that can be specified are as follows:
Item
File Type
Resolution
Simplex/Duplex
Original Type
Scan Size
Zoom
Density
Original Setting
Application
Separate Scan
File Name
2-44
Description
Selects the file type for saving the
scanned data.
Selects the scan resolution.
Selects whether to scan one side of
the document or both sides.
Sets the image type of the scanned
document.
Sets the paper size to be scanned.
Sets the zoom ratio for scanning.
Frequently used zoom ratios can be
stored.
Specify the density for scanning.
Specifies the type of document that
is loaded, for example, if it contains
mixed page sizes or is folded in a
zigzag.
Provides functions for adjusting the
image to be scanned, for example,
for scanning books and for
scanning pages.
The scan operation can be divided
into several sessions when all pages
of a document cannot be loaded
into the ADF or when placing the
document on the original glass. In
addition, the documents can be
scanned separately according to
their type, such as when single-
sided documents are mixed with
double-sided documents.
Changes the name of the file to be
saved.
Scanning Documents
Reference
"File Type" on page 2-45
"Resolution" on page 2-47
"Simplex/Duplex" on page 2-48
"Original Type" on page 2-49
"Scan Size" on page 2-50
"To specify the zoom ratio for
scanning (Zoom setting)" on
page 2-54
"Density" on page 2-56
"Original Setting" on page 2-57
"Book Scanning (Application)" on
page 2-59
"Booklet Pagination
(Application)" on page 2-61
"Annotation (Application)" on
page 2-62
"Full Scan (Application)" on
page 2-64
"Frame Erase (Application)" on
page 2-65
"Center Erase (Application)" on
page 2-66
"Non-Image Area Erase
(Application)" on page 2-68
"Neg-/Pos. Reverse
(Application)" on page 2-69
"Separate Scan" on page 2-70
"File Name" on page 2-72
bizhub 750/600