Konica Minolta BIZHUB 600 User Manual page 299

4
Item
Neg-/Positive Reverse
Non-Image Area Erase
When "Group: Scan" is selected
Item
No.
Name
Group
Resolution
File Type
Scan Setting
Subject
Text
Simplex/Duplex
Original Type
Separate Scan
Density
Zoom
Scan Size
E-Mail Notification
Destination
File Name
Original Direction
Bind
Special Original
Book Scanning
4-32
Specifying Settings Using PageScope Web Connection
Description
Select whether or not the black and white areas of the
document are reversed in the scan.
Select whether or not the shadows along the edges of a
document are erased from the scan.
Description
Enter the registration number.
Enter the registration name (up to 24 characters).
Click , and then select a group destination from the list to
display the group number.
Select the resolution.
Select the file format.
Select the unit of the data to be saved.
Specify the subject (Not Specified, 1 to 10). When "Not Spec-
ified" was selected, the default title is used. Click
the contents.
Specify the text (Not Specified, 1 to 10). When "Not Specified"
was selected, the default text is used. Click
contents.
Select "1-Sided", "2-Sided", or "Cover + 2-Sided".
Select the quality of the original such as text or photo.
Select "ON" or "OFF".
Adjust the density.
Select the enlargement or reduction ratio for scanning. Select
a preset zoom ratio or specify separate ratios for the X and Y
directions.
Select the original size ("Auto", "Standard Size", "Custom
Size").
For "Custom Size", specify the horizontal and vertical
scanning sizes.
The upload destination of the file can be notified to the spec-
ified address.
Click to select the notification addresses.
Enter the file name (up to 30 characters).
Select the orientation of the original document.
Select the original binding position.
Select whether the document contains mixed page sizes or is
Z-folded.
Select whether or not to enable book scanning. If "ON" is
selected, the scanning method and binding position are
specified.
to check
to check the
bizhub 750/600