Konica Minolta BIZHUB 600 User Manual page 132

Specifying Settings From the Control Panel
7
Touch [OK].
8
Touch [Index] and touch the desired button.
– This specifies the characters used to index the destination.
– For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.
– If the first character of the name is a letter, the first character is au-
tomatically registered as the indexing character.
– The registration cannot be completed unless settings have been
specified for "Name" and "E-Mail Address".
9
Touch [OK], and then touch [OK] in the next screen that appears.
The e-mail destination is registered.
!
Detail
To check the registered destination, touch the button for the destination,
and then touch [Check].
To change the registered destination settings, touch the button for the
desired destination, and then touch [Edit].
To delete the registered destination, touch the button for the desired des-
tination, and then touch [Delete].
Note
If [Registering and Changing Address] is restricted, use [One-Touch Reg-
istration] in [Administrator Setting].
bizhub 750/600
3
3-11