Netware Settings; Netware Parameters - Konica Minolta BIZHUB 600 User Manual

3
3.13

NetWare Settings

The settings for using the machine on a NetWare network can be specified.

NetWare Parameters

The NetWare settings are as follows:
NetWare Setting screen 1/5
Item
IPX Setting
Ethernet Frame Type
Authentication System
NetWare Setting screen 2/5
Item
NetWare Print Mode
Status
NetWare Setting screen 3/5
Item
Print Server Name
Print Server Password
Polling Interval
NDS/Bindery Setting
NetWare Setting screen 4/5
Item
File Server Name
3-54
Specifying Settings From the Control Panel
Description
Specify whether to use IPX.
Sets the frame type that is used for communications.
When [ON (External Server)] was selected in "User
Authentication", specify whether to allow NDS
authentication.
Description
Select the print mode to be used.
The NetWare status can be verified. For details on specify-
ing the setting, refer to "Status" on page 3-58.
Description
Sets the print server name. Use the keyboard that appears
in the touch panel to type in the print server name (up to 63
characters).
Sets the password that is required when the print server
logs in to the file server. Use the keyboard that appears in
the touch panel to type in the password (up to 63
characters).
Sets the interval for searching the print queue. To change
the interval, press the [C] (clear) key, and then use the
keypad to type in the value (between 1 and 65535).
If bindery is disabled, only NDS is enabled. If bindery is
enabled, both NDS and bindery are enabled.
Description
Sets the file server name to which the print server logs in.
Use the keyboard that appears in the touch panel to type in
the server name (up to 47 characters).
bizhub 750/600