Displaying The Scan Screen; Bizhub 750/600 - Konica Minolta BIZHUB 600 User Manual

Scanning Documents
2.2

Displaying the Scan Screen

Display the Scan mode screen in order to perform scanning operations.
Turn the machine on. When the machine is ready to make copies, the Basic
screen appears.
Press the [Scan] key in the control panel to display the Scan mode screen.
The displayed functions and modes can be selected by gently touching the
buttons that are displayed in the screen.
2
1
No Name
1 Sub display area
2 [Job List] button
3 Date/Time display area
4 Message display area
5 [Program] button
6 [Group] button
7 [Address Book] button
8 [Direct Input] button
9 Available memory display
10 Address number display
area
11 [Scan Settings] button

bizhub 750/600

3 4 5
Description
This area displays destinations, etc.
Displays jobs being performed and jobs being stored.
Various commands for checking and managing jobs are
available.
Displays the current date/time.
Displays the machine status and details on operations
that must be performed.
Displays destinations that are registered in programs.
Displays destinations that are registered in groups.
Used to Search for destinations that are registered in the
address book.
Used to type in the destination when performing Scan to
E-mail, Scan to FTP, or Scan to SMB operations or to se-
lect the box where the job is to be stored.
This button does not appear if the [Manual Destination In-
put] on the Security Details screen (displayed by touching
[Security Setting] on the Administrator Setting screen) is
set to "Restrict".
Shows the amount of available memory that is used
during the scanning operation.
Shows the number of specified addresses.
Used to specify scan settings.
6 7 8 9
2
10
11
2-5