Specifying Settings From the Control Panel
3.35
OpenAPI Settings
Specify whether or not therface is open to software with a function for com-
municating with the copier. The settings for "Access Setting", "Port No.",
"SSL", and "Authentication" of OpenAPI can be changed.
Access Setting
Sets whether to permit access from other systems that use OpenAPI. (De-
fault setting: Allow)
1
In the Administrator Setting screen, touch [9 System Connection]. (Re-
fer to page 3-8 for more details.)
2
In the System Connection screen, touch [1 OpenAPI Setting].
3
In the OpenAPI Setting screen, touch [Access Setting].
Buttons for selecting settings appear.
4
Touch the desired selection key.
–
To permit access using OpenAPI, touch [Allow].
–
To prohibit access using OpenAPI, touch [Restrict].
Access using OpenAPI is set to be permitted or prohibited.
bizhub 750/600
3
3-133