Konica Minolta BIZHUB 600 User Manual page 300

Specifying Settings Using PageScope Web Connection
Item
Booklet Pagination
Erase
Center Erase
Full Image Area
Neg-/Positive Reverse
Non-Image Area Erase
When "No Destination (Store Scanner)" is selected
Item
No.
Name
Resolution
File Type
Scan Setting
Simplex/Duplex
Original Type
Separate Scan
Density
Zoom
Scan Size
E-Mail Notification
Destination
File Name
Original Direction
Bind
Special Original
bizhub 750/600
Description
Select whether or not to enable page scanning. If "ON" is
selected, the binding position is specified.
Specify the width of the perimeter of the document to be
erased.
Specify the width of the area along the binding that is to be
erased.
Select whether or not the image is scanned reduced to the
minimum zoom ratio, then centered within the paper so that
no part of the image is cut off.
Select whether or not the black and white areas of the
document are reversed in the scan.
Select whether or not the shadows along the edges of a
document are erased from the scan.
Description
Enter the registration number.
Enter the registration name (up to 24 characters).
Select the resolution.
Select the file format.
Select the unit of the data to be saved.
Select "1-Sided", "2-Sided", or "Cover + 2-Sided".
Select the quality of the original such as text or photo.
Select "ON" or "OFF".
Adjust the density.
Select the enlargement or reduction ratio for scanning. Select
a preset zoom ratio or specify separate ratios for the X and Y
directions.
Select the original size ("Auto", "Standard Size", "Custom
Size").
For "Custom Size", specify the horizontal and vertical scan-
ning sizes.
The upload destination of the file can be notified to the spec-
ified address.
Click to select the notification addresses.
Enter the file name (up to 30 characters).
Select the orientation of the original document.
Select the original binding position.
Select whether the document contains mixed page sizes or is
Z-folded.
4
4-33