Authentication - Konica Minolta BIZHUB 600 User Manual

3

Authentication

Specify whether to use authentication for access from other systems that
use OpenAPI. (Default setting: OFF)
1
In the Administrator Setting screen, touch [9 System Connection]. (Re-
fer to page 3-8 for more details.)
2
In the System Connection screen, touch [1 OpenAPI Setting].
3
In the OpenAPI Setting screen, touch [Authentication].
The OpenAPI Setting screen appears.
4
Touch the desired key under "Authentication".
– If "ON" is selected, proceed to step 5 and enter the login name and
password.
– If "OFF" is selected, proceed to step 9.
5
Touch [Login Name].
6
Enter the login name (up to 8 characters), and then touch [OK].
The login name is set.
7
Touch [Password].
3-136
Specifying Settings From the Control Panel
bizhub 750/600