Konica Minolta BIZHUB 600 User Manual page 354

Specifying Settings Using PageScope Web Connection
Item
Use SSL/TLS Port No.
(SSL/TLS)
Connection Timeout
Max Mail Size
Server Capacity
Admin. E-Mail Address
POP Before SMTP
POP Before SMTP Time
SMTP Authentication
User ID
Password
Domain Name
Binary Division
Divided Mail Size
!
Detail
If running an antivirus program on the e-mail server, the binary division
function may not be able to be used. For details, ask the network admin-
istrator.
To receive binary e-mails, an e-mail client that supports receiving sepa-
rated e-mail is required. Note that even if separated e-mail is received it
may not be combined depending on the e-mail client being used.
Note
If selecting [Please check to enter host name.], check that the DNS set-
tings are specified correctly before making the selection. For details, refer
to "TCP/IP" on page 4-64.
bizhub 750/600
Description
Specify whether to use SSL/TLS during e-mail transmission.
To use, select the check box, and then type in the port
number.
Specify the connection timeout of the server (input range: 30
to 300 seconds).
Specify whether to limit the size of e-mail transmissions.
Enter the SMTP server capacity when mail size restriction is
enabled (input range: 1 to 100 MB).
Enter the From address for scanner transmissions and the
From address when user authentication is disabled (up to 320
characters).
Specify whether to use POP Before SMTP.
Enter the POP Before SMTP time (input range: 0-60 seconds).
Select whether to use SMTP server authentication.
Enter the user ID when performing SMTP server authentica-
tion (up to 63 characters).
Enter the password for SMTP server authentication (up to 15
characters).
Enter the SMTP server domain name.
Specify whether to send large volume of e-mail in small sizes
and separated. Use to send data that has exceeded the
maximum capacity when the maximum capacity is limited per
e-mail on the e-mail server.
Enter the division size for binary files (input range: 100 to
15000 KB).
4
4-87