Rear Brake Pedal Position Adjustment - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

SETTINGS AND ADJUSTMENTS

Rear brake pedal position adjustment

The position of the rear brake pedal with respect to the footrest may be adjusted
according to individual needs.
For adjusting, proceed as follows:
- Loosen the screw (1).
- Turn the cam (2) in order to raise or lower the brake pedal within the range
available (A).
- When finished, tighten the screw (1).
Once this adjustment is completed, adjust the free play of the pedal following the
instructions provided in paragraph "Rear brake pedal free play adjustment".
D.12 Ed. 07-2010