Right Crankcase Assembly - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

ENGINE REASSEMBLY

Right crankcase assembly

Refit the oil pump drive gear (1) and its shaft (2).
Check the O-rings of the oil suction stub (3) and replace them if needed.
Refit the oil suction stub (3).
Refit the centring bushings (4).
Refit the gasket (5).
Manually check for correct installation and operation of the pump (6) and make
sure the crankshaft sealing ring (7) is in the correct position.
Ed. 07-2010 H.51