Filter And Drain Plug; Blow-By Tube Fitting/Filter (310); Oil Feed Hose Installation - Husqvarna TE 250 - 310 2011 I.E. Workshop Manual

ENGINE REASSEMBLY

Filter and drain plug

250
Fit the oil filter (1) and tighten the cap (2) into place with its gasket using a 12
mm wrench (25 Nm, 2.5 Kgm, 18.44 ft/lb).
310

Blow-by tube fitting/filter (310)

Insert the oil filter (1), screw the hose fitting (2), insert hose (3) and screw clamp
4
(4).
3
2
1
H02352
H02351

Oil feed hose installation

Refit the hose (1) and tighten the drilled screws (2) with their seals using a 12
mm wrench (8 Nm, 0.8 Kgm, 5.9 ft/lb).
Ed. 07-2010 H.53