Konica Minolta IC-304 Plus Service Manual page 85

16. Select the Boot menu and verify that the settings are the same as shown in the
following window:
Phoenix cME TrustedCore Pro Setup Utility
Main Advanced
Boot priority order:
1: USB LS120:
2: USB KEY:
3: IDE CD: HL-DT-ST DVDRAM GSA-H10N-
4: USB CDROM:
5: IDE 0:
6: IDE 1:
7: IDE 2: Hitachi HDS721680PLA380- (
8:
Excluded from boot order:
: IDE 3:
: IDE 4: Hitachi HDS721680PLA380- (
: IDE 5: Hitachi HDS721680PLA380- (
: USB FDC:
: USB HDD:
: USB ZIP:
: PCI SCSI:
F1 Help Select Item
Esc Exit Select Menu
17. If the boot order is not the same as shown in step 16, or if one or more of the
devices that should appear in the Boot priority order list appears in the
Excluded from boot order list, do the following:
a. Using the arrow keys, select the device that you want to appear in the Boot
priority order list.
b. On your keyboard, press the
of the Boot priority order list.
c. Move the selected device to its correct position in the Boot priority order
list.
•
Press repeatedly until the device reaches the correct order in the list.
X
18. Select the Exit menu.
19. Using the arrow keys, select Exit Saving Changes and press
Security Boot Exit
-/+ Change Values
Enter
Select Sub-Menu
key to add the selected device to the bottom
X
Item Specific Help
Keys used to view or
configure devices:
Up and Down arrows
select a device -
<+> and < > moves
the device up or down.
<f> or <r> specifies
the device fixed or
removable.
<x> exclude or include
the device to boot.
<Shift + 1 enables or
disables a device.
<1 - 4> Loads default
boot sequence.
F9 Setup Defaults
F10 Save and Exit
.
ENTER
69