Konica Minolta IC-304 Plus Service Manual page 20

4
3. Wait 20 seconds before pressing the power control button on the IC-304 print
controller (see Figure 2 on page 3). The ON/OFF LED on the front panel
illuminates a steady green.
After the system startup is complete, the Windows desktop appears.
4. If a power failure occurs while the server is turned on, the server will restart
automatically when power is restored.
To turn off the IC-304 print controller:
We recommend that you perform an orderly shutdown of the operating system
before turning off the server.
1. Press the power control button to turn off the server.
2. Disconnect the AC power cable from the AC power source.
WARNING:
Switching off only the power control button will leave some circuits
energized. For complete disconnection from the supply, the main AC power cable
must also be disconnected from the AC power source.
Chapter 1—First Time Setup and Configuration