Konica Minolta IC-304 Plus Service Manual page 128

112
Installing the Microprocessor
1. Touch the antistatic package containing the new microprocessor to any
unpainted metal surface on the server, and then remove the microprocessor
from the package.
2. Unlock the microprocessor socket.
a. Press the socket lever down to release the load plate from its locking
position. The load plate covers the microprocessor socket.
Socket lever
Figure 23: Microprocessor socket lever
b. Gently lift the socket lever to open the load plate.
Figure 24: Opening the load plate
c. Remove the load plate.
3. Locate Pin 1 on the microprocessor socket.
Note: Pin 1 is the corner marked with a triangle.
Chapter 4—Hardware and Maintenance Repairs
Load plate
Load plate