Konica Minolta IC-304 Plus Service Manual page 101

System Error Messages
Message
System error. Reboot the
system.
System error. Reinstall
the IC-304 print
controller application
Hardware Error Messages
Message
FusionIN load
failure. Reboot
the system.
Software Error Messages
Message
Failed to spool
the file during
job submission
Failed to locate
the thumbnail for
element <name of
element> in the
job <job name>
Wrong striping
configuration—
reboot the
computer and
configure the
striping
Recovery Action
1. Restart the system from the
Start menu.
2. If the error message reappears,
run the diagnostics test.
Reinstall the IC-304 print
controller software, and restart the
. system.
Recovery Action
1. Check that the FusionIN board is seated
correctly and restart the system.
2. Run the diagnostics test.
3. If the error message still appears, replace
the board.
Recovery Action
Check the image disk space and free disk
space, if required.
Repeat the RIP process.
Re-create striping. See Disk Striping on
page 42.
85