Konica Minolta IC-304 Plus Service Manual page 81

Floppy Disk Controller: This setting allows you to assign control of the floppy
disk controller.
•
Hardware Monitor:
Select this submenu to change the following settings:
CPU Temperature Threshold: This option allows you to set a CPU
temperature threshold that will activate the alarm system when the CPU
temperature reaches the predefined temperature threshold.
Fan Speed Control Modes: This option allows you to decide how the system
controls the speed of the on-board fans.
Voltage Monitoring
System Event Log
Real Time Sensor Data
Selecting From the Phoenix cME FirstBIOS Pro Setup Utility Boot
Menu
•
Boot Priority Order and Exclusions From Boot Order
For details on how to change the order and specifications of the boot order, see
the Item Specific Help area.
Selecting From the Phoenix cME FirstBIOS Pro Setup Utility Exit
Menu
•
Exit Saving Changes: This option allows you to save any changes that you made
and to exit the BIOS setup utility Setup Utility.
•
Exit Discarding Changes: This option allows you to exit the BIOS setup utility
Setup Utility without saving any changes that you may have made.
•
Load Setup Defaults: This option allows you to load the default settings for all
items in the BIOS setup. This is the safest setting to use.
•
Discard Changes: This option allows you to discard (cancel) any changes that
you made. You will remain in the BIOS setup utility Setup Utility.
•
Save Changes: This option allows you to save any changes that you made. You
will remain in the BIOS setup utility Setup Utility.
Configuring the Computer BIOS
1. Start the Phoenix cME FirstBIOS Pro Setup Utility. See Starting the Phoenix cME
FirstBIOS Pro Setup Utility on page 62
The Phoenix cME FirstBIOS Pro Setup Utility window appears.
Tip:
To modify any of the following values, use the arrow keys to move to
the required values, and the +, -, and numbered keys to change the values.
65