Konica Minolta IC-304 Plus Service Manual page 48

32 Chapter 2—Reinstalling the IC-304 Print Controller Software
2. Back up the job list database.
Note: For instructions, see Backing Up the Job List Database on page 33.
3. Move the backups to an external device or to a network.
4. Restore the system partition.
Note: For instructions, see Restoring the IC-304 Print Controller System
Partition on page 34.
5. Restore the job list database.
Note: For instructions, see Restoring the Job List Database on page 37.
The following scenarios will help you to determine when to use the backup and
restore procedures and when to use the reinstallation procedures.
Procedure Use
Backup and Always recommended except when
restore the system must be reinstalled. See
the following row.
Reinstallation Complete Overwrite
•
Backup not available or is corrupt
•
System disk replacement
•
Upgrading the system disk
System Partition Overwrite
•
Windows operating system is
corrupt
There are two reinstallation methods:
•
Color Server Software Complete Overwrite Installation, which overwrites
partitions C and D, should be performed only when installing a new operating
system, when physically replacing the system disk or when upgrading the
system disk.
Partition C contains the operating system files. Partition D contains the color
server software files (job list database and user files).
•
Color Server Software Preservation Installation (System Partition Overwrite),
which overwrites partition C, should be performed when the Windows XP
operating system operating system is corrupt and needs to be reinstalled.