Konica Minolta IC-304 Plus Service Manual page 62

46 Chapter 2—Reinstalling the IC-304 Print Controller Software
To initialize the disks:
1. In the Disk Management widow, right-click the Disk 1 area, and select Initialize
Disk.
2. Verify that both image disk check boxes are selected, and click OK.
3. Verify that the Computer Management window appears similar to the following
window.
4. Proceed to Converting the Disks to Dynamic Disks.
Converting the Disks to Dynamic Disks
1. In the Disk Management window, right-click in the Disk 0 area.