3. Verify that the Foreign disk set (2 of 2 disks selected) check box is selected
and click OK.
4. Click OK.
The Dynamic disks are striped, as shown in the following window.
5. Close the Computer Management window.
6. When the
Image Disks File System is not Formatted
appears, click OK.
Striping Unknown Disks
The following procedures describe how to initialize the unknown disks to basic disks
and to convert the basic disks to dynamic disks.
Perform the following procedures if you have:
•
Replaced an image disk
•
Low-level formatted one or more image disks
45
message