Konica Minolta IC-304 Plus Service Manual page 24

8
2. Click the Change button.
Attention: Do not change the Workgroup or Domain in step 3 unless
instructed to do so. If you are changing the Domain/Workgroup, verify that you
have the user name and password for the Domain/Workgroup.
3. In the Computer name box, type the new name for the computer. If you would
like to change the Workgroup or the Domain in which your computer appears,
type the new name in the corresponding area and click OK.
A message appears to inform you that changes will take effect only after
restarting the computer.
4. Click OK.
5. In the System Properties dialog box, click OK.
Note: During the configuring process, when prompted to restart your
No
computer, click . At the end of the Configuration Wizard, you will be
prompted to restart your system.
Chapter 1—First Time Setup and Configuration