Compaq ProLiant Clusters HA/F100 Administrator's Manual page 98

3-18 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
17. If configuring an HA/F200 with Windows NTS/E, install the Compaq
Redundancy Manager on both nodes using the following steps:
a. Place the Compaq Redundancy Manager (Fibre Channel) CD in the
CD-ROM drive. It automatically loads the Install program.
b. Follow the instructions offered by the Redundancy Manager
installation screens.
c. Remove the Compaq Redundancy Manager (Fibre Channel) CD
from the CD-ROM drive.
d. Reboot the node.
To manually install Redundancy Manager:
a. Place the Compaq Redundancy Manager (Fibre Channel) CD into
the CD-ROM drive.
b. Select Settings from the Start menu.
c. Select Control Panel from the Settings menu.
d. Select Add/Remove Programs from the Control Panel.
e. Click Install from the Add/Remove Programs page.
f. Click Next from the Add/Remove Programs page.
g. Click Browse from the Add/Remove Programs page.
h. Locate the Redundancy Manager SETUP.EXE file on the Compaq
Redundancy Manager (Fibre Channel) CD.
i. Click Finish from the Add/Remove Programs page. The setup
program begins.
j. Follow the instructions displayed on the Redundancy Manager
installation screens.
k. Close the Control Panel.
l. Remove the Compaq Redundancy Manager (Fibre Channel) CD
from the CD-ROM drive.
m. Reboot the node.
To use Redundancy Manager, double-click the icon. For more
information about Redundancy Manager, refer to the online
documentation (CPQDXCFG.HLP) included on the CD.