Compaq ProLiant Clusters HA/F100 Administrator's Manual page 172

6-18 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide
Table 6-6
Compaq Redundancy Manager Informational Messages
You have not selected all the
Paths to the following logical
disk(s):
You have not selected an Active
Path to <xxxxxx>.
You have not selected any Paths
to <xxxxxx>.
You have not selected a Standby
Path to <xxxxxx>.
Message
The logical disk or drives shown
are claimed but not all possible
paths were assigned.
A logical disk is claimed but no
Active Path is selected.
A logical disk is claimed but no
paths are assigned.
A logical disk is claimed but no
Standby Path is assigned.
continued
Description Action
Click OK for the Redundancy
Manager to automatically assign
the paths for this logical disk;
Or, click Cancel to assign the
paths manually.
Click OK for the Redundancy
Manager to automatically assign
the path for this logical disk;
Or, click Cancel to assign the
path manually.
Click OK for the Redundancy
Manager to automatically assign
the paths for this logical disk;
Or, click Cancel to assign the
paths manually.
Click OK for the Redundancy
Manager to automatically assign
the path for this logical disk;
Or, click Cancel to assign the
path manually.