Printer Initialization - Wasp WPL304 User Manual

WPL 304 User Manual
•
Dump mode
Printer will enter dump mode after printing printer configuration. In the dump mode, all
characters will be printed in 2 columns as following. The left side characters are
received from your system and right side data are the corresponding hexadecimal value
of the characters. It allows users or engineers to verify and debug the program.
ASCII Data
Note:
1. Dump mode requires 4" wide paper width.
2. Turn off / on the power to resume printer for normal printing.
3. Press FEED button to back to the previous menu.

4.3.3 Printer Initialization

Printer initialization is used to clear DRAM and restore printer settings to defaults. The
only one exception is ribbon sensitivity, which will note be restored to default.
Printer initialization is activated by the following procedures.
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns green after 5 amber blinks. (Any green will do
during the 5 blinks).
•
The LED color will be changed as following:
Amber
blinks)
- -
red (5 blinks) amber (5 blinks)
-
red/amber (5 blinks)
-
green (5 blinks)
-
solid green
31
Hex decimal data related to
left column of ASCII data
-
green/amber (5