Wasp WPL304 User Manual page 37

WPL 304 User Manual
red/amber will do during the 5 blinks).
• The LED color will be changed as following:
Amber
blinks)
4.3.6 Skip AUTO.BAS
WPL programming language allows user to download an auto execution file to flash
memory. Printer will run the AUTO.BAS program immediately when turning on printer
power. The AUTO.BAS program can be interrupted without running the program by the
power-on utility.
Please follow the procedures below to skip an AUTO.BAS program.
1. Turn off printer power.
2. Press the FEED button and then turn on power.
3. Release the FEED button when LED becomes solid green.
• The LED color will be changed as following:
Amber
blinks)
4. Printer will be interrupted to run the AUTO.BAS program.
- -
red (5 blinks) amber (5 blinks)
-
red/amber (5 blinks)
- -
red (5 blinks) amber (5 blinks)
-
red/amber (5 blinks)
-
green (5 blinks)
-
solid green
-
green (5 blinks)
-
solid green
33
-
green/amber (5
-
green/amber (5