Setup; Setting Up The Printer - Wasp WPL304 User Manual

WPL 304 User Manual

3.1 Setting up the Printer

1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and
then plug the power cord into a properly grounded power outlet.
Ethernet RJ-45
interface
USB interface
Centronics interface
Note:
Please switch OFF printer power switch prior to plug in the power cord to printer power jack.

3. Setup

RS-232C interface
8
Power
Switch
Power Supply
Plug