Loading The Ribbon - Wasp WPL304 User Manual

WPL 304 User Manual

3.3 Loading the Ribbon

1. Open the printer
2. Open the ribbon access cover.
•
opened while opens the top cover. Ribbon access cover
can be closed while top cover is open or close.
•
then the ribbon access cover can be opened or closed.
3.
Align the notches on the left side and mount onto the
spokes. Make sure the ribbon is dull side down.
s top cover by pulling the top
'
cover open levers located on each side of the
printer and lifting the top cover to the maximum
open angle.
Note:
In normal printing mode, ribbon access cover can be
In peeler and cutter mode, please open the top cover
Insert the ribbon right side onto the supply hub.
10