Wasp WPL304 User Manual page 6

WPL 304 User Manual
WARNUNG!
GEFÄHRLICHE BEWEGLICHE TEILE
FERNHALTEN!
VORSICHT!
EXPLOSIONSGEFAHR BEI ERSATZ DER
BATTERIE DURCH UNZULÄSSIGEN TYP.
VERBRAUCHTE BATTERIEN IMMER
VORSCHRIFTSGEMÄSS ENTSORGEN!
B
(
Note
* Continuous printing will cause the printer motor to overheat. The printer will stop printing
automatically for approximately 10~15 minutes while the motor is cooling down. Please don't turn
off power when the printer pauses or the data transferred to the printer buffer will be lost.
* The maximum printing ratio per dot line is 15% for this printer. To print the full web black line, the
maximum black line height is limited to 40 dots, which is 5mm for 203 DPI resolution printer and
3.3mm for 300 DPI resolution printers.
* The max. full web black bar is limited to 5 mm only, otherwise this may damage the power supply.
1. HAZARDOUS MOVING PARTS IN CUTTER MODULE. KEEP FINGER AND OTHER BODY
PARTS AWAY.
2. THE MAIN BOARD INCLUDES REAL TIME CLOCK FEATURE HAS LITHIUM BATTERY
CR2032 INSTALLED. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
3. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER INSTRUCTIONS.
)
FINGER UND ANDERE KÖRPERTEILE
–
.
2